Our Portfolio

Our mill gondolas are perfect for shipping scrap steel and other commodities not affected by weather. They are among the best maintained mill gondolas in the industry.

This transverse coil gondola is a specialty coil car featuring 10 individual troughs for loading various sizes of steel coils in the same car. These cars also can accommodate 84-foot coils on each end, in addition to smaller coils at the same time. These cars are equipped with steel covers to protect the coils from weather damage.

Our small covered hoppers are designed for dry bulk loads that require protection from the weather – including cement, sand, roofing granules, petroleum coke and other materials. The all-steel hoppers are equipped with three 30-inch diameter roof hatches for loading and two gravity discharge outlets.

We have a young fleet of 50-feet boxcars that features all-steel construction and a variety of door configurations including both 10-feet and 12-feet door openings.

Centerbeams are designed to carry bundled building supplies, including dimensional lumber, wallboard and fence posts. They are essentially bulkhead flatcars reinforced by a longitudinal I-beam truss down the center of the railcar. Along with adding strength, the center truss helps protect cargo from damage caused by loads moving during transit. Due to their design, centerbeam cars must be loaded symmetrically, with equal payload on each side of the partition.

These 25,500-gallon tank cars are typically used in flammable chemical and crude oil services.  All cars have the latest design with exterior jackets, thermal protection and detachable outlet valve handles to meet all regulatory requirements for flammable service.

Our gravity large covered hoppers are all-steel and designed for soybean meal, grain and grain meal, with over 5,808 cubic feet to allow for maximum payloads. Products are loaded through 47′ 8″ x 24″ hatches at the top of the railcar and unloaded through bottom outlets, with 42″ x 42″ gates.

Due to the expensive nature of drying commodities such as distillers grain, jumbo covered hoppers are a practical choice if you need to ship large amounts of product that must have protection from damage caused by weather.

Our large covered hoppers are all-steel and designed for plastic resin pellets, with over 6,200 cubic feet to allow for maximum payloads. Products are loaded through 10 hatches at the top of the railcar and unloaded through bottom outlets.

Our medium covered hoppers are all-steel and designed for dry bulk loads that require protection from the weather – including corn, soybeans, meal, wheat, grains and other products. Products are loaded through top hatches and unloaded through wide, gravity gates at the bottom of the railcar.

If you’re shipping a product with strict guidelines like carbon black, it’s beneficial to choose a specialized railcar designed specifically for that material.

We are willing to work with you on any specialty covered hopper configurations to meet your specific needs. Cars can be built in various capacities and materials, such as stainless steel or with linings. They can also be designed for gravity, pneumatic and pressure differential unloading.

These 22,660-gallon tank cars are typically used in the transport of hydrochloric acid.  These are some of the best-maintained 22k tank cars in the industry, with fast response time from our sales team to help keep your commerce moving.

These 28,800-gallon tank cars are typically used in flammable services and are ideal for diesel and biodiesel applications. They can be used for crude oil and other flammable applications. All cars have the latest design with exterior jackets, thermal protection and detachable outlet valve handles to meet all regulatory requirements for flammable service.

These tank cars are typically used in flammable services for crude oil, ethanol and methanol – as well as many other flammable liquids. All cars have the latest design with exterior jackets, thermal protection and detachable outlet valve handles to meet all regulatory requirements for flammable service.

These pressurized tank cars are typically used for liquified gasses in hazardous service such as propylene. All cars are designed with thermal protection to meet all regulatory requirements for flammable service.

These pressurized tank cars are typically used for liquified gasses in hazardous services such as LPG, propane and butane. All cars are designed with thermal protection to meet all regulatory requirements for flammable service.

We are willing to work with you on any specialty tank car configurations to meet your specific needs. Cars sized 16,000-30,000 gallons can be provided, including stainless steel and fully-lined cars.

Our aluminum open-top hoppers are specifically designed to carry the maximum amount of coal. Many of our coal hoppers are equipped with both bottom-gate unloading and rotary couplers, which allow for rotary dumping of the car’s contents.

We also provide open-top hoppers for bulk commodities unaffected by weather and are unloaded from under the car.

Our coal gondolas are high-capacity, open-top railcars specifically designed to maximize coal loading. These aluminum railcars have solid bottoms and can only be used when rotary discharge is available. Their design makes them a leader in the industry, with a carrying capability of 122 tons of coal.

Longitudinal coil gondolas feature a single trough running longitudinally down the center of the car. These cars are equipped with steel covers to protect the coils in the car from weather damage.

These cars are equipped to handle steel coils up to 84 inches in diameter.

This transverse coil gondola features 5 individual troughs for loading various size steel coils. These cars are equipped with steel covers to protect the coils from weather damage.

Our mill gondolas are perfect for shipping scrap steel and other commodities unaffected by weather. They are among the best-maintained mill gondolas in the industry.

These 3-unit double-stack intermodal cars are used for domestic intermodal service. These cars are designed for maximum flexibility to the shipper, with 53 feet, 2 inches between container guides. They are equipped to carry two 20-foot-long containers or can carry one 40-, 45-, 48- or 53-foot container per car.

These are well-maintained, single platform railcars designed for 53-foot containers. The single platform offers maximum flexibility and accommodates the largest, industry-standard containers.

We have a young fleet of 60-feet boxcars that features all-steel construction and a variety of door configurations, including both 10-feet and 12-feet door openings.

Our newly-built autoracks have been engineered to safely transport vehicles, including high-profile trucks and vans with a 20′-2″ hinging deck. The deck may be configurable as a bi-level or low bi-level easily, allowing on-site adjustments at loading locations to save automotive shippers time and money. They also have a patented door design that greatly reduces the risk of theft and vandalism.